5/2(土)～5/6(木) ゴールデンウィーク休暇のお知らせ
BINDINGS
BOOTS
ACCESSORIES
PARTS
BINDING PARTS
BOOTS PARTS
OTHERS
OUTLET
ABOUT FLUX
CONTACT
MEMBER
SHIPPING
REPAIR
MODELS
A limited edition model with an upgraded CV.
By using a carbon blend for the base plate and disc plate and titanium for the mounting screws, we have achieved greater rigidity and lighter weight, resulting in even better response.
Take your carving turns to the next level.
It features two pillars that resemble buffalo horns, which support the flat high back from both sides.
A medium flex material that is suitable for all speeds, from low to high, and for beginners to experts.
Compact and lightweight. Easy to adjust with one action.
Moving it one memory forward will tilt the seat forward by approximately 2.5 degrees. This allows for more precise high back settings.
The heel cup is about 15mm higher than the Transfer Base, which improves backside response and makes it less prone to drag.
Special carbon is mixed with domestic virgin nylon. This material is extremely light and strong, allowing for high-level board control.
The material used is snow-resistant even in harsh environments, and the shoes provide a direct feel on the soles of your feet while still providing the cushioning you need for riding.
Movable cushion that allows adjustment of the toe side and heel site to suit boot size and board width.
The stabilizer firmly yet gently transmits the powerful power generated by the height heel cup to the board.
Five highback mounting holes allow rotation at both foot forward angles.
A two-layer structure consisting of a waffle cushion with a comfortable hold and ease of movement that makes you forget you're wearing it, and a Power Strap that provides direct power transmission.
Newly designed ratchet buckle that securely tightens until the last tightening. Equipped with a bottle opener function that you don't have to worry about when toasting.
In order to increase the transmission of power, the center line is strengthened, and the upper and lower ends are made more flexible to enhance the fit with the boots.
The belt can be stored smoothly to avoid getting caught in the snow during toeside turns.
The strap belt between the heel cup and the highback wraps the boot from all angles, providing a natural hold and even pressure.
Multi-disc that can be installed in either 4x4 or 2H. Can also be installed with a 5mm or 10mm offset from the front or back or left or right.
The special carbon blend rotary disc delivers next-level movement and responsiveness.
The best setting is possible without tools. Comes with a stopper to prevent the screws from loosening.
Mounting screws that are 50% lighter and stronger thanks to the titanium alloy compound.