XF WOMENS
This is a high-end model that generously uses FLUX technology and materials to achieve the ultimate in operability.
It is the only model among all models that mixes carbon fiber in the highback and uses titanium for the mounting screws of the highback and the strap, achieving both light weight and high response.
From the 23-24 season, carbon is also added to the mounting disc. In addition, the use of Boost FootOn, which is 4mm higher than the normal footbed, enables even quicker turning and stable edging.
XF WOMENS
- Review
This is a high-end model that generously uses FLUX technology and materials to achieve the ultimate in operability.
It is the only model among all models that mixes carbon fiber in the highback and uses titanium for the mounting screws of the highback and the strap, achieving both light weight and high response.
From the 23-24 season, carbon is also added to the mounting disc. In addition, the use of Boost FootOn, which is 4mm higher than the normal footbed, enables even quicker turning and stable edging.
Function
high back
W-Props Highback
Two rods running on the back improve the torsion performance and support of the highback. A sliding cushion on the inner upper part keeps the boot flexible. Realizes the response, support and freedom required for carving at a high level.
super carbon blend
Special carbon is blended with domestic virgin nylon. Board control at a high level is possible with materials that seek lightness and strength to the limit.
Redux Lean Adjuster
Lighter weight due to smaller size. Easy adjustment with one action.
Micro Adjuster
If you move it forward by 1 memory, it will tilt forward about 2.5 degrees. More detailed high back setting is possible.
Slide plate
A material with low friction is placed so as not to hinder the lateral flex of the boot.
base plate
Transfer Baseplate
Power is reliably transmitted to the impact point, lightweight and direct response.
super carbon blend
Special carbon is blended with domestic virgin nylon. Board control at a high level is possible with materials that seek lightness and strength to the limit.
Boost Footon
A footbed with a 4mm higher cushion than the conventional FootOn. It prevents drag during turns and absorbs fine vibrations while improving response when turning. Of course, the surface is made of a material that does not easily adhere snow.
Adjustable Toe & Heel Cushion
Movable cushion that can be adjusted toe side and heel site according to boot size and board width.
super carbon blend
Special carbon is blended with domestic virgin nylon. Board control at a high level is possible with materials that seek lightness and strength to the limit.
strap
Waffle Strap
A two-layer structure consisting of a waffle cushion with a comfortable hold and ease of movement that makes you forget you're wearing it, and a Power Strap that provides direct power transmission.
Beer Buckle
Newly designed ratchet buckle that securely tightens until the last tightening. Equipped with a bottle opener function that you don't have to worry about when toasting.
FTM VER.5.0
In order to increase the transmission of power, the center line is strengthened, and the upper and lower ends are made more flexible to enhance the fit with the boots.
L-Guide
The belt can be stored smoothly to avoid getting caught in the snow during toeside turns.
others
UU Fit
By attaching a strap belt between the heel cup and the highback, the system wraps the boots from 360 degrees. This realizes a natural hold feeling and equalization of pressure.
Multi Disc
A multi-disc that can be attached to either 4x4 or 2H. It is also possible to install with a 5mm or 10mm shift in the front and back or left and right.
Titanium Screw
A mounting screw that achieves 50% weight reduction and further strength by compounding titanium alloy. The XV also uses titanium for the straps and highback mounting screws.
carbon disc
A special carbon-blended rotary disc leads to another dimension of movement and response.
high back
high back
W-Props Highback
Two rods running on the back improve the torsion performance and support of the highback. A sliding cushion on the inner upper part keeps the boot flexible. Realizes the response, support and freedom required for carving at a high level.
super carbon blend
Special carbon is blended with domestic virgin nylon. Board control at a high level is possible with materials that seek lightness and strength to the limit.
Redux Lean Adjuster
Lighter weight due to smaller size. Easy adjustment with one action.
Micro Adjuster
If you move it forward by 1 memory, it will tilt forward about 2.5 degrees. More detailed high back setting is possible.
Slide plate
A material with low friction is placed so as not to hinder the lateral flex of the boot.
base plate
base plate
Transfer Baseplate
Power is reliably transmitted to the impact point, lightweight and direct response.
super carbon blend
Special carbon is blended with domestic virgin nylon. Board control at a high level is possible with materials that seek lightness and strength to the limit.
Boost Footon
A footbed with a 4mm higher cushion than the conventional FootOn. It prevents drag during turns and absorbs fine vibrations while improving response when turning. Of course, the surface is made of a material that does not easily adhere snow.
Adjustable Toe & Heel Cushion
Movable cushion that can be adjusted toe side and heel site according to boot size and board width.
super carbon blend
Special carbon is blended with domestic virgin nylon. Board control at a high level is possible with materials that seek lightness and strength to the limit.
strap
strap
Waffle Strap
A two-layer structure consisting of a waffle cushion with a comfortable hold and ease of movement that makes you forget you're wearing it, and a Power Strap that provides direct power transmission.
Beer Buckle
Newly designed ratchet buckle that securely tightens until the last tightening. Equipped with a bottle opener function that you don't have to worry about when toasting.
FTM VER.5.0
In order to increase the transmission of power, the center line is strengthened, and the upper and lower ends are made more flexible to enhance the fit with the boots.
L-Guide
The belt can be stored smoothly to avoid getting caught in the snow during toeside turns.
others
others
UU Fit
By attaching a strap belt between the heel cup and the highback, the system wraps the boots from 360 degrees. This realizes a natural hold feeling and equalization of pressure.
Multi Disc
A multi-disc that can be attached to either 4x4 or 2H. It is also possible to install with a 5mm or 10mm shift in the front and back or left and right.
Titanium Screw
A mounting screw that achieves 50% weight reduction and further strength by compounding titanium alloy. The XV also uses titanium for the straps and highback mounting screws.
carbon disc
A special carbon-blended rotary disc leads to another dimension of movement and response.